FREE SHIPPING ON PRECUT KIT ORDERS OF $100 OR MORE
Do you have a window that doesn’t fit into our standard pre-cut window kits, but you don’t want to have to cut from a roll? We’ve got the answer! Our ComforTech™ Ceramic Series custom cut window film kits are cut to your window measurements, labeled, and sent to you ready for easy install!
Only our best-selling ComforTech™ Ceramic Series window film is the only film that comes in custom cut window film kits. ComforTech™ is by far our biggest selling window film (90%+ of what we sell). We are able to offer custom cut window film kits for ComforTech™ because we sell so much of it.
We sell a handful of other films (Matte White, Clear UV, 4MIL Safety and Silver 15 Reflective) to round out our offering but we don’t do enough volume in them to warrant a custom cut program.
Custom Window Film Kits Available Options:
Shades: 45 • 35 • 25 • 15 • 05
Widths: 24” • 30” • 36” • 48” • 60” • 72”
Lengths: 1” Increments • Minimum 12” • Maximum 180”
Custom window film kits can be ordered for our ComforTech Ceramic Series window film only. Kits are available in six standard widths: 24”, 30”, 36”, 48”, 60”, and 72” and in lengths starting at a minimum of 12″ and increasing in 1′ increments up to a maximum of 180″.
Please note, that ComforTech film is not approved for windows over 40 square feet in area due to the increased risk of thermal stress failure with the glass – so we won’t fulfill orders for any single piece of film greater than 40 square feet in size.
You can order custom cut window film kits on our custom cut page: https://windowfilm.com/custom-window-film-kits. Follow the steps below to purchase kits for your project:
ComforTech Ceramic Series comes in five performance shades that are from darkest to lightest: 05, 15, 25, 35, 45. Use our guide to select the shade of window film you want to purchase. If you are unsure, consider ordering a window film sample kit to view the film in your home.
Then measure the width and height of the glass portion of your windows only. Do not include the window frame. Add one inch to the width and the height for exact trimming to size (some older windows may not be plumb and final trimming ensures a perfect installation).
For the width, round up to the next largest standard width available. So for example, if your window measures 28″ wide, adding 1″ for trimming to the exact size yields 29″. Round up to the next available width which is 30″ and select that.
Lengths are available in 1″ increments and can be entered as calculated (measured with the addition of 1″ for exact trimming).
Read our full article on measuring your windows for window film.
Now that you have your measurements, use them to choose the dimensions on our Custom Cut Window Film Kits page.
First choose your width. Remember, we have six standard widths to choose from:
24”, 30”, 36”, 48”, 60” and 72”
Choose the width that is equal to or larger than your width +1” measurement. An important thing to note is that our film can be oriented either way – so if your length matches more closely to one of our standard width options, feel free to enter the film that way.
Pro tip: When I price out custom cut orders for customers, I always add in the dimensions both ways to see which one is a more efficient use of film (and therefore less expensive!)
Next choose your length. Lengths are available in 1” increments with a minimum length of 12” and a maximum length of 180”. Please keep in mind that we will not sell a piece of film larger than 40 square feet in size (this is because larger panes of glass have a higher risk for breakage – with or without window film).
The window film calculator will automatically calculate the price of the piece of film.
Finally, select the number of pieces of film you need at the dimension you just entered. Remember So if you need three pieces of film 30” x 41”, you would select quantity of 3 and then add that dimension film to your cart.
For additional pieces of film, you will need to return to the custom cut page and enter each in individually following the same steps.
This is a question we get asked frequently. And the answer is because of how our film is custom cut. Let’s first look at the standard width question:
We take a roll of film in the width closest to the width you need, and we cut the film to length by hand on our cutting tables. Of course we take the utmost care when cutting, but hand cut pieces naturally aren’t as precise as machine cut pieces.
We always want you to have two factory (machine cut) edges to the film we provide you which is why we only provide standard sizes.
The second way we cut is in whole inch increments. The reason for this because the professional way to install window film, is to place the film on the window when it is at least a ½” to 1” larger than the glass pane.
This is because window frames are not always true and square and the only way to ensure a tight fit of the film to the frame is to do the final trim at the window. If a piece of film is cut even a little bit scant, it will create a light gap at the edge which will be bothersome and annoying.
Having the window film cut for you to the approximate sizes you need saves you time during installation. We will cut and label each piece of film for you by size so that all you need to do is clean the windows and start installing film. The measuring and cutting is done for you.
Hand in hand with saving time, is simplifying the installation process. If you are a bit unsure about window film installation (don’t be! It’s not that hard 😊), having the film precut for you takes the guesswork out of installing window film.
Plus, you don’t need to worry about measuring, marking, and cutting the film to size from a larger piece of film or roll and potentially making a mistake during that step.
If your windows don’t fit into the standard precut kit sizes we offer, purchasing a roll of film might leave you with more film than you actually need.
Here are some typical use cases we see why customers order custom cut window film kits:
Windows are too large or small for our precut kits, and
You are filming your double-hung windows in the house with our precut kits, but have one window (like a picture window) that is too large for our pre-cut kits.
All of your windows are a standard size, and you are purchasing a 36” roll for the cost savings, but you need just a few feet more than the roll offers, so you order the one extra piece of film as a custom cut.
Custom cut window film kits can be a great choice when you want to save time or have odd or larger sized windows. But don’t take our word for it, see what customers who have purchased our custom cut kits have to say.
Below are a few of our most recent reviews (you can read all of our reviews on our custom cut page):
We hope this answered all your questions about custom cut window film kits from Concord Window Film! But if not, please don’t hesitate to reach out to us: support@windowfilm.com, 1-888-206-1413 , or via the chat function on our website. Our US-based customer service staff is happy to assist you!
If you aren’t sure the best way to purchase Concord Window Film, check out our article on the three ways we sell our film: https://windowfilm.com/how-to-buy-window-film-3-ways/
And if you’d like us to provide all the best options and pricing for you, simply send us the exact glass measurements (don’t add any extra) of each of your windows and we will be happy to provide a quote!
Shop Custom Cut Window Film Kits
